Description
Product Description
- Brand: Bently Nevada
- Model: 330101-00-49-10-12-05
- Series: 3300 XL
- Product Type: 8 mm Proximity Probe
- Designed for continuous machinery vibration monitoring
- Measures shaft displacement with high repeatability
- Rugged stainless steel body improves mechanical strength
- Patented TipLoc molding strengthens probe tip bonding
- Patented CableLoc design improves cable pull resistance
- Optional FluidLoc cable blocks oil and liquid migration
- Made in U.S.A with strict quality control
Technical Specifications
- Brand: Bently Nevada
- Model: 330101
- Probe Diameter: 8 mm
- Thread size 3/8-24 UNF
- Unthreaded length 0.0 in
- Case length 4.9 in
- Total cable length 1.0 meter
- Miniature coaxial ClickLoc connector
- FluidLoc sealed cable design
- Nominal probe resistance 7.59 ohms ±0.50
- Linear measurement range 0.25 to 2.3 mm
- Usable linear range 2 mm
- Recommended gap setting -9 Vdc
- Sensitivity 7.87 V/mm
- Deviation from linearity less than ±1 mil
- Probe resolution supports micrometer vibration detection
- Frequency response optimized for rotating machinery
Environmental & Durability Performance
- Probe tip material PPS plastic
- Probe case AISI 303 or 304 stainless steel
- Standard temperature range -52°C to +177°C
- Extended probe tip range up to +218°C
- Cable temperature range up to +260°C
- Humidity impact less than 3 percent ASF drift
- Viton O-ring seals differential pressure
- Designed for oil mist and harsh industrial air
- Strong EMI resistance with shielded wiring
Installation Guidance
- Mount using standard 3/8-24 UNF threads
- Set initial gap using voltage method
- Use shielded triad field wiring
- Maximum field wiring length 305 meters
- Avoid temperatures below -34°C during installation
Commissioning & Maintenance
- No calibration needed after correct gap setting
- Stable output reduces frequent re-adjustment
- Quick connector simplifies replacement
- Supports predictive maintenance strategies
System Compatibility
- Compatible with 3300 XL Proximitor sensors
- Works with Bently Nevada monitoring systems
- Supports standard 1, 5, and 9 meter systems
Certifications & Compliance
- Approvals: CSA, ATEX, IECEx
- Country of Origin certificate available
- Complies with international industrial standards
Packaging & Warranty
- One proximity probe with integrated cable
- Factory inspection before shipment
- 12 months warranty from delivery date
- Secure export-grade packaging
Shipping Options
- Worldwide delivery via FedEx
- UPS international express available
- DHL fast industrial logistics supported
Typical Applications
- Steam and gas turbines
- Centrifugal compressors
- Large motors and generators
- Pumps and critical rotating equipment
- Condition monitoring systems
Diagnostic Capabilities
- Detects shaft vibration trends
- Supports early fault identification
- Improves asset uptime
- Enables data-driven maintenance decisions
FAQ
- Can this probe replace older 3300 series probes?
- Yes. It offers stronger housing and better signal stability.
- Is FluidLoc cable required for oil-filled machines?
- Yes. It prevents oil migration through the cable core.
- Does long field wiring reduce signal quality?
- Long cables may reduce high frequency response.
- Is the probe pressure tested before shipment?
- No. Pressure testing is available on request.
- What causes early probe failure in cold areas?
- Installation below -34°C may damage the pressure seal.
Copyright © 2025
PLCDCS HUB Limited.
All rights reserved.
Partner:
Powergear X Automation Limited |
Oiltech Controls Limited
Contact:
+86 158 8020 0923
0.0 Average Rating Rated (0 Reviews)