Bently Nevada 330104-00-09-15-01-00 | Short Armored 3300 XL Probe | 1.5m Cable

Description

Compact Armored Vibration Sensor

This 3300 XL 8mm Proximity Probe combines armor with a compact design. Its short 90mm case fits in tight spaces. It includes a protective connector boot. The specific model is 330104-00-09-15-01-00.

Model Number Configuration

• Full Part Identifier: 330104-00-09-15-01-00
• Base Product Code (330104):
  • Armored 3300 XL 8mm Probe.
  • Thread Type: M10 x 1.0 Metric.
  • Provides extra physical protection.
• Your Selected Options:
  • 00: No Unthreaded Shank (0mm).
  • 09: Short Case Length = 90mm.
  • 15: Cable Length = 1.5 Meters.
  • 01: ClickLoc Connector with Protector Boot.
  • 00: Agency Approvals = Not Included.

Product Specifications

• Design Highlights:
  • Short Armored Body: Ideal for limited clearance areas.
  • Protected Connection: Boot shields from dust and moisture.
• Electrical & Performance:
  • Probe Resistance: 7.73 ± 0.50 Ohms (1.5m).
  • Measurement Range: 2.0 mm linear.
  • Target Gap: Set to 1.27 mm for -9 Vdc.
• Physical Data:
  • Case: Armored Stainless Steel (AISI 303/304).
  • Tip: Rugged PPS Material.
  • Max Thread Engagement: 15 mm.
• Environmental Ratings:
  • Wide Temp Operation: -52°C to +177°C.
  • Humidity Resistant: Stable in high moisture.
  • Seal: Viton® O-ring (avoid sustained cold below -34°C).

Installation & Selection FAQ

Specifications & Use Case

• Why would I choose the “00” option for no unthreaded section?
• This is for direct threading into a blind hole or mounting boss. The probe seats fully using the threads without a shoulder.
• What applications suit this 90mm short case length?
• Perfect where space behind the mounting point is restricted, such as inside gearbox housings or on motors with limited axial room.

Technical & Compatibility

• The resistance is 7.73 Ohms for 1.5m. How does length affect system calibration?
• The monitoring system (proximitor) expects a specific total loop resistance. The 1.5m cable’s resistance is factored into the system’s 7.87 V/mm sensitivity. Always match the probe length to the system setup.
• Can I use this armored probe in a hazardous location?
• It can be part of a certified system. You must use approved intrinsic safety barriers (per drawing 141092) for Zone 0/1 areas.

Purchasing & Support

• I need this specific short, armored model. What is your process?
• We supply the exact 330104-00-09-15-01-00. Each unit has a 12-month manufacturer’s warranty. We ship globally via FedEx, UPS, or DHL. For immediate help: Contact us on WhatsApp.

Copyright © 2026 PLCDCS HUB Limited. All rights reserved.
Original Source: https://plcdcshub.com/
Partner: Powergear X Automation Limited | Oiltech Controls Limited