Bently Nevada 330901-00-09-70-02-05 | 3300 NSv Vibration Probe | 7m Cable for Machinery

Description

Product Introduction

This is a genuine 3300 NSv Proximity Probe. It monitors machine vibration and position. It helps prevent costly breakdowns. The model is 330901-00-09-70-02-05. It is made in the USA for high quality.

Key Product Details

• Complete Model: 330901-00-09-70-02-05
• Core Part: 330901 (Basic Probe Type)
  • Thread: 1/4-28 UNF, No Armor.
• Configuration Suffix: -00-09-70-02-05
  • 00: Unthreaded Length = 0 inch.
  • 09: Case Length = 0.9 inch.
  • 70: Total Cable = 7.0 meters (23 feet).
  • 02: Connector = Mini Coaxial ClickLoc.
  • 05: Approvals = Multiple Agency Certifications.
• Robust Build: Case is AISI304 Stainless Steel. Tip is tough PPS plastic.
• Reliable in Extreme Conditions: Works from -52°C to +177°C.

Essential Technical Specifications

• Electrical Output: Eddy-current based gap voltage.
• Internal Resistance: 5.9 ± 0.9 Ohms (for 7m version).
• Cable: 75 Ω coaxial with FEP insulation.
• Installation Torque: Use 11.3 N•m (100 in-lb). Maximum is 33.9 N•m.
• Thread Engagement: Do not exceed 0.563 inches.
• Sealing: Viton O-ring seals the probe tip. Avoid long periods below -34°C.
• Weight: Very light, between 14 and 150 grams.

Frequently Asked Questions (FAQ)

Technical & Compatibility Questions

• What is the cable impedance, and why is it important?
• The cable is 75 Ω coaxial. This matches the monitor input. It ensures accurate signal transfer.
• Can I cut the cable to a shorter length if needed?
• No. The probe length and resistance are calibrated at the factory. Use the correct model for your length requirement.

Installation & Durability

• The installation instructions mention a pressure seal. What pressure can it handle?
• The probe seals its internal electronics from the external environment. It is not designed for high-pressure vessel use. The seal protects against oil mist and dust ingress.
• From a maintenance expert, what is the most common cause of probe failure?
• Physical damage to the cable or connector. Secure the cable properly. Avoid sharp bends and crushing.

Ordering & Service

• I need this probe for a critical machine replacement. What is your delivery and quality promise?
• We ship genuine, factory-fresh probes. We offer 12-month warranty. We ship fast via FedEx, UPS, or DHL. For urgent needs, contact us: +86 158 8020 0923 (WhatsApp).

Copyright © 2026 PLCDCS HUB Limited. All rights reserved.
Original Source: https://plcdcshub.com/
Partner: Powergear X Automation Limited | Oiltech Controls Limited