Description
Product Introduction
This is a brand new, genuine Bently Nevada industrial sensor. The exact product number is 330702-00-26-50-02-00. It belongs to the famous 3300 XL 11 mm Proximity Probes series. This item is made in the USA and ships in original factory packaging. It is perfect for machinery vibration monitoring.
Questions? Get instant help via WhatsApp: +86 158 8020 0923.
Product Specifications
- Basic Information
- Manufacturer: Bently Nevada
- Product Type: 11 mm Proximity Probe
- Origin: Made in U.S.A.
- Part Number Decoder: 330702-00–26–50–02–00
- 330702 – Base Model: 3300 XL 11mm Probe, 1/2-20 UNF Thread, With Armor.
- -00 – Unthreaded Length: 0.0 inch (Fully Threaded Case).
- -26 – Overall Case Length: 2.6 inches.
- -50 – Total Cable Length: 5.0 meters (16.4 feet). For use with 5m Proximitor only.
- -02 – Connector: Miniature Coaxial ClickLoc (Standard Cable).
- -00 – Agency Approval: Not Required.
- Technical Data
- Electrical: Probe Resistance (5.0m): 7.2 Ω ± 0.8 Ω.
- Mechanical:
- Thread: 1/2-20 UNF.
- Max Thread Engagement: 0.750 inch.
- Case Torque: Recommended 15.2 N•m (133 in•lb), Max 45.2 N•m.
- Materials:
- Case: AISI 304 Stainless Steel (Armored).
- Tip: Polyphenylene Sulfide (PPS).
- Cable: 75 Ω Triaxial, FEP Insulated.
- Environmental:
- Operating Temperature: -51°C to +177°C (-60°F to +351°F).
- Seal: Viton O-ring. Not pressure tested before shipping.
Installation Notes
- Use with a 5-meter Proximitor sensor only.
- Screw into a 1/2-20 UNF threaded hole.
- Tighten to the recommended 15.2 N•m torque.
- Do not engage more than 0.75 inches of thread.
- Handle connector by hand; maximum torque 0.565 N•m.
- Do not bend cable tighter than a 1.0-inch radius.
Compatibility & Use
- Designed for Bently Nevada 3300 XL monitoring systems.
- Used to measure shaft vibration and position.
- Ideal for turbines, compressors, and large motors.
FAQ: Expert Guidance
Product Specifics
- Q: Why does this 5-meter probe only work with a 5-meter Proximitor?
- A: The system is calibrated as a matched set. Using a 5m probe with a different length Proximitor will cause incorrect gap voltage readings.
Installation & Handling
- Q: How do I handle the armored cable correctly?
- A: The armor protects the cable but is not rigid. Always maintain a bend radius over 1 inch (25.4mm) to prevent internal damage. Avoid sharp edges.
- Q: The probe is not pressure tested. Is it safe for my application?
- A: The Viton O-ring provides a standard industrial seal. For high-pressure or safety-critical applications, you must contact Bently Nevada’s custom design department for specific testing.
Ordering & Delivery
- Q: What is the difference between this armored probe (330702) and an unarmored one?
- A: This model has a stainless steel braid over the cable for extra physical protection against cuts, abrasion, and crush damage in harsh plant environments.
- Q: What is your shipping and warranty policy for this item?
- A: We offer a 12-month warranty on this new, original probe. We ship globally via FedEx, UPS, and DHL with full tracking provided.
Smart Buying Guide
- Confirm your system uses 1/2-20 UNF threaded probes.
- Verify you need a 5-meter system (probe + proximitor).
- Choose armored version for tough environments.
- Check the 2.6-inch case length fits your mounting space.
- Remember, this model (-00 suffix) has no special agency approvals.
- Your purchase is protected by warranty and shipped fast.
Copyright © 2026 PLCDCS HUB Limited. All rights reserved.
Original Source: https://plcdcshub.com/
Partner: Powergear X Automation Limited | Oiltech Controls Limited
0.0 Average Rating Rated (0 Reviews)