9200-02-05-05-00 Bently Nevada – 9200 Two-wire Velocity Transducer

Description

Bently Nevada 9200-02-05-05-00 Vibration Monitor

Model Code Explained

• 9200 Base unit
• 02 45° angle | 4.5Hz min
• 05 Terminal block connector
• 05 1/2-20 UNF stud (no base)
• 00 No safety certs

Key Specs

• Works from -29°C to 121°C
• Detects vibrations at 4.5-100Hz
• 125mH locked coil
• 1.25kΩ ±5% resistance
• Weight: 300g (10.5oz)

Industrial Solutions

• Power Plants: Finds turbine blade issues at 45° mounting
• Paper Mills: Stops dryer section roller failures
• Steel Mills: Detects gearbox problems in rolling mills
• Chemical Plants: Monizes pump cavitation in corrosive areas

Comparison

• VS 9200-03-01-01-00: 90° vs 45° mount | 1/4-20 vs 1/2-20 stud
• VS 9200-03-01-10-00: Terminal block vs top connector | Different stud sizes

Expert Q&A

Q: Why 45° mounting?
A: Better for tight spaces like compressor housings
Q: How to connect wires?
A: Use 22-16 AWG on terminal block
Q: Works with vertical machines?
A: Yes – keep within ±2.5° of 45°
Q: Replace frequency?
A: Check every 2 years in high-heat areas

Installation Alert

• Use thread locker on 1/2-20 UNF stud
• Max cable length: 300m (shielded)
• Ground terminal B for best signal

Success Stories

• Prevented $180k loss at coal plant by finding fan imbalance
• Reduced pump repairs 55% in chemical processing unit