AI-TEK 70085-1010-314 Speed Sensor | Magnetic Pickup 55V P-P

AI-TEK 70085-1010-314 Speed Sensor

This AI-TEK 70085-1010-314 is a passive magnetic pickup sensor. It detects gear teeth or target movement without external power. Ideal for industrial speed monitoring systems.

Technical Specifications

• Brand: AI-TEK
• Model: 70085-1010-314
• Thread Size: .375 no thd
• Thread Length: 1.375 in (34.9 mm)
• Total Sensor Length: 1.375 in (34.9 mm)
• Output Voltage (Standard): 55 V (P-P)
• Output Voltage (Guarantee Point): 4.2 V (P-P)
• DC Resistance: 960 ohms max.
• Typical Inductance: 125 mH (reference)
• Output Polarity: White lead positive
• Operating Temperature: -30 to +85 °C
• Temperature Rating: -30 to 85 °C
• Lead Length (standard): 6 in (15.2 cm) – Code -004
• Cable Length (this model): 10 ft (3.05 m) – Code -314
• Termination: Cable (integral)
• Net Weight: 3 oz max. (85 g)
• Agency Approval: None (General purpose)

Construction & Compatibility

• Housing: Stainless steel body for harsh environments
• Mounting: Threaded .375 UNF-2A thread
• Gap Setting: Requires proper air gap (typically 0.002 to 0.006 inch)
• Compatibility: Works with most PLC counters, tachometers, and speed switches
• Target Material: Ferrous metal gear teeth or shaft keyways

Installation & Maintenance

• Installation: Screw sensor into mounting hole until it touches gear teeth, then back out 1/2 turn.
• Torque: Tighten locknut to 5-10 lb-in (do not overtighten).
• Maintenance: Periodically check air gap. Clean metal debris from sensor tip.
• Diagnosis: Use an oscilloscope to verify output voltage. No output means open coil or wrong gap.

Typical Applications

• Speed monitoring on pumps, fans, and conveyors
• Over-speed or under-speed shutdown systems
• Engine RPM sensing on generators and compressors
• Direction detection (with dual sensor setup)

Packaging & Warranty

• Each sensor comes in anti-static bag with foam protection.
• Warranty: 12 months against manufacturing defects.
• Shipping: FedEx, UPS, or DHL express (tracking provided).

Selection Guide & FAQ

• Q: Can this sensor work with a 24V DC input card?

  A: No. The output is analog AC voltage. Use a signal conditioner or a dedicated magnetic pickup module.

• Q: What gear module should I use?

  A: Use module 1 to 3 (DP 8 to 25). Finer teeth produce lower output voltage.

• Q: My sensor shows zero output. What is wrong?

  A: Check the air gap first. Also test resistance across leads (should be ~960 ohms).

• Q: Can I cut the cable to a shorter length?

  A: Yes, but it reduces output voltage slightly. Seal the cut end properly.

• Selection Tip: For high-temperature areas above 85°C, choose the AI-TEK 70085-1010-***-HT version.
• Selection Tip: For longer cable runs (>50 ft), add a preamplifier near the sensor.

Contact & Support

Need a quote or technical advice? Call us: +86 158 8020 0923 (WhatsApp).

Copyright © 2026 PLCDCS HUB Limited. All rights reserved.
Original Source: https://plcdcshub.com/
Partner: Powergear X Automation Limited
Partner: Oiltech Controls Limited