Bently Nevada 330102-00-13-10-02-00 3300 XL 8mm Probe | No Approvals

Description

Product Overview

The Bently Nevada 3300 XL 8 mm Proximity Probe measures radial vibration and axial position. Model 330102-00-13-10-02-00 uses a rugged PPS tip and stainless steel case. It provides reliable data for rotating machinery protection. This probe suits turbines, compressors, pumps, and generators.
For larger shaft applications, see the 3300 XL 11 mm Proximity Probes.

Key Technical Specifications

• Brand: Bently Nevada
• Model: 330102-00-13-10-02-00
• Series: 3300 XL
• Type: 8 mm Proximity Probe, armored
• Measurement range: 2 mm (80 mils), linear from 0.25 to 2.3 mm (10-90 mils)
• Output signal: -1 to -17 Vdc (approx)
• Recommended gap setting (vibration): -9 Vdc (~1.27 mm / 50 mils)
• Probe tip material: Polyphenylene sulfide (PPS)
• Case material: AISI 303 or 304 stainless steel
• Thread size: 3/8-24 UNF, max engagement 0.563 inch
• Total length: 1.0 meter (3.3 feet)
• Unthreaded length: 0.3 inch
• Overall case length: 1.3 inches
• Connector: Miniature coaxial ClickLoc, standard cable
• DC resistance (RPROBE): 7.59 ± 0.50 Ω
• Operating temp (standard probe): -52°C to +177°C (-62°F to +350°F)
• Storage temp: same as operating range
• Extended temp tip: -52°C to +218°C (-62°F to +425°F)
• Extended temp cable/connector: -51°C to +260°C (-60°F to +500°F)
• Low temp caution: Below -34°C (-30°F) may damage pressure seal
• Humidity tolerance: <3% scale factor change at 93% RH for 56 days (IEC 68-2-3)
• Pressure seal: Viton O-ring, designed for differential pressure sealing
• Field wiring: 0.2-1.5 mm² (16-24 AWG), shielded triad, max 305 m (1000 ft)

Installation & Mechanical Data

• Thread engagement limit: 0.563 inch maximum
• Probe weight: 323 g/m (11.4 oz)
• Mount flush or recessed per your fixture design
• Use proper torque for 3/8-24 UNF threads – do not over-tighten
• Keep cable bend radius within manufacturer guidelines

Compatibility & System Integration

• Compatible with 5 meter Proximitor sensor (for 1.0m probe length)
• 3m probe length only available on 330101 models for 9m Proximitor
• Maximum distance from Proximitor sensor to monitor: 305 meters (1000 feet)
• Refer to frequency response graphs for signal rolloff at long wiring

Certifications & Hazardous Area Approvals

• Intrinsically safe (ia): Class I, Zone 0 AEx/Ex ia IIC T5…T1 Ga; Class I, II, III Div 1 Groups A-G (with zener barriers per dwg 141092 or galvanic isolators)
• Non-incendive (nA/ec): Class I, Zone 2 AEx/Ex nA IIC T5…T1 Gc; Class I Div 2 Groups A-D (per dwg 140979)
• Temperature class schedule (EPL Ga/Gc): T1 at -55 to +232°C, T2 at -55 to +177°C, T3 at -55 to +120°C, T4 at -55 to +80°C, T5 at -55 to +40°C
• Agency approval option: Not required (code 00)

Diagnostic Capabilities & Typical Applications

• Diagnoses: Shaft vibration, axial position, bearing wear, rotor imbalance, misalignment
• Typical assets: Steam turbines, gas turbines, centrifugal compressors, pumps, generators, fans, blowers
• Helps detect early faults and prevent unplanned downtime

Maintenance & Serviceability

• No routine calibration needed during normal service life
• PPS tip resists wear and many chemicals
• Armored cable protects against mechanical damage
• ClickLoc connector ensures fast and secure connections
• Gap adjustment is straightforward using target distance

Packing List

• 1 x 3300 XL 8 mm Proximity Probe (model 330102-00-13-10-02-00)
• Mounting hardware not included – order separately
• Proximitor sensor not included – use with 3300 XL Proximitor

Warranty & Shipping

• Warranty: 12 months against manufacturing defects from delivery date
• Shipping carriers: FedEx, UPS, DHL – worldwide express shipping available
• Tracking number provided within 24 hours after dispatch

Frequently Asked Questions (FAQ)

Q: Can I use this 1.0m probe with a 9m Proximitor sensor? A: No. Use only with 5m Proximitor sensor.
Q: Is this probe pressure tested before shipment?
A: No. Contact our custom design department if you require pressure seal testing.

Q: What is the maximum field wiring length?
A: 305 meters (1000 feet) between Proximitor and monitor. Longer runs reduce high-frequency response.

Q: What happens if temperature drops below -34°C?
A: The pressure seal may fail early. Keep the probe above -34°C for seal life.

Experience-Based Q&A

Q: We get noisy signals on a high-speed fan. Could cable routing be the issue? A: Yes. Separate probe cables from power cables. Use shielded triad wiring and ground the shield properly.
Q: Can I extend the probe cable itself?
A: No. Use only the original 1.0m cable. Extend only via Proximitor sensor field wiring.

Selection Guide

• Choose 330102-00-13-10-02-00 for 1.0m armored probe with 0.3 inch unthreaded length and 1.3 inch case
• Select unthreaded length = 00 (0.3 in) for partial thread engagement
• Pick case length = 13 (1.3 in) for compact mounting spaces
• Use connector code 02 for reliable ClickLoc miniature coaxial connection
• For high-temperature tips above +177°C, order extended range version
• Choose agency approval code 00 if not required for your zone
• Verify thread engagement (max 0.563 in) to avoid mechanical damage

For inquiries, contact us on WhatsApp: +86 158 8020 0923

Copyright © 2026 PLCDCS HUB Limited. All rights reserved.

Original Source: https://plcdcshub.com/

Partner: Powergear X Automation Limited | Oiltech Controls Limited