Bently Nevada 330102-00-40-10-02-00 3300 XL 8 mm Probe – PPS Tip

Description

Product Overview

Bently Nevada 330102-00-40-10-02-00 is a 3300 XL 8 mm Proximity Probe. It measures radial vibration and position in turbines, compressors, and pumps. The probe uses a PPS tip and stainless steel case. This model includes armor, a 1.0 meter cable, and a miniature coaxial ClickLoc connector. Operating range is -52°C to +177°C. It supports hazardous area installations with Ex ia and nA approvals.
For inquiries: +86 158 8020 0923 (WhatsApp)

Key Technical Data

• Brand: Bently Nevada
• Model Number: 330102-00-40-10-02-00
• Series: 3300 XL
• Type: 8 mm Proximity Probe
• Linear Range: 2 mm (80 mils) from 0.25 to 2.3 mm
• Recommended Gap (Radial Vibration): -9 Vdc (~1.27 mm / 50 mils)
• DC Resistance (1.0 m length): 7.59 ± 0.50 Ω
• Temperature Range (Standard Probe): -52°C to +177°C
• Probe Tip Material: Polyphenylene sulfide (PPS)
• Probe Case Material: AISI 303 or 304 stainless steel
• Thread Size: 3/8-24 UNF
• Max Thread Engagement: 0.563 inch
• Humidity Test: <3% scale factor change at 93% RH for 56 days

Measurement & Performance

• Frequency Response: Reliable signal with field wiring up to 305 meters. See rolloff graphs for high frequencies.
• Resolution: High resolution for vibration and position monitoring.
• Linearity: Linear output from -1 to -17 Vdc over 2 mm range.
• Environmental Tolerance: Withstands humidity per IEC 68-2-3.
• Noise Immunity: Works with shielded triad cable for low noise.

Installation Guide

• Use 0.2 to 1.5 mm² (16-24 AWG) tinned field wiring.
• Recommended cable: 3-conductor shielded triad.
• Max wire length between sensor and monitor: 305 m (1000 ft).
• Do not expose probe below -34°C often. It may damage the pressure seal.
• Thread engagement max: 0.563 inch.
• Torque and gap setting: Set to -9 Vdc for radial vibration.

Compatibility

• Works with 3300 XL Proximitor Sensor.
• Use intrinsic safety barriers (drawing 141092) or galvanic isolators.
• Non-incendive circuit connection per drawing 140979.
• Compatible with monitors accepting 3300 XL probes.
• 3300 XL 11 mm Proximity Probes also available.

Certifications

• Ex ia IIC T5…T1 Ga (Class I, Zone 0; Class I, Div 1, Groups A, B, C, D; Class II, III)
• Ex nA IIC T5…T1 Gc (Class I, Zone 2; Class I, Div 2, Groups A, B, C, D)
• Ex ec IIC T5…T1 Gc (Class I, Zone 2)
• Temperature class T5 (ambient -55°C to +40°C) up to T1 (-55°C to +232°C) for EPL Ga/Gc.
• For EPL Dc: T280°C at Ta up to +232°C down to T90°C at +40°C.
• Agency Approval Option: 00 = Not required (customer specified).

Maintenance & Service

• No routine calibration needed. Factory sealed.
• Check cable and connector for damage before each use.
• Pressure seal not factory tested. Contact custom design if needed.
• Easy replacement: same thread and length options.

Typical Applications & Diagnostics

• Applications: Steam turbines, gas turbines, centrifugal compressors, fans, pumps, generators, and motors.
• Diagnostic ability: Detects shaft vibration, axial position, and eccentricity. Helps predict bearing wear, unbalance, and misalignment.
• Connects to PLCs, DCS, or condition monitoring systems for real-time alerts.

Package Contents

• 1 x 3300 XL 8 mm Probe (PPS tip, armored, 3/8-24 thread)
• Cable length: 1.0 meter with miniature coaxial ClickLoc connector
• Installation manual (digital copy)
• No agency approval certificate included (option 00)

Warranty & Shipping

• Warranty: 12 months against manufacturing defects.
• Shipping carriers: FedEx, UPS, DHL. Fast global delivery.

Frequently Asked Questions (FAQ)

• What is the linear range of this probe?
• 2 mm (80 mils). Starts at 0.25 mm from target.
• Can I use this probe in high temperature?
• Yes. Standard tip works up to +177°C. Extended range up to +218°C (tip).
• Does the probe work with 3300 XL 11 mm models?
• No. The 8 mm probe is separate. See 11 mm series here.
• What happens below -34°C?
• Pressure seal may fail early. Keep above -34°C for reliability.
• How do I select the correct probe length?
• Check your thread depth and cable distance. Use unthreaded length 00 (0 in), case length 4.0 in, total cable 1.0 m.
• Can I cut the cable?
• No. Cutting changes resistance and calibration. Order custom length instead.
• Which connector type is this?
• Miniature coaxial ClickLoc connector, standard cable. Option code 02.
• Do you have stock for emergency orders?
• Yes. Contact +86 158 8020 0923 via WhatsApp for fast shipment.
• Why is the pressure seal not tested?
• Standard units skip test to reduce cost. Request custom testing if needed.

Buying Guide

• Match probe thread (3/8-24 UNF) to your mounting hole.
• Select total cable length: 1.0 m for short runs. Longer? Use extension cable.
• Need hazardous area? Choose Ex ia version with barriers.
• For high vibration or high temp, confirm T-class and ambient range.
• Always pair with 3300 XL Proximitor Sensor for correct output.
• New to Bently Nevada? Start with 8 mm probe for standard machines. Upgrade to 11 mm probes for larger gap or rough surfaces.

Copyright © 2026 PLCDCS HUB Limited. All rights reserved.

Original Source: https://plcdcshub.com/

Partner: Powergear X Automation Limited

Oiltech Controls Limited