Bently Nevada 330102 3300 XL 8 mm Proximity Probe Order Online

Description

Product Description

• Bently Nevada 330102-00-48-10-02-05 is a 3300 XL 8 mm Proximity Probe.
• It measures vibration and position in rotating machinery.
• This probe works with 3300 XL Proximitor Sensors.
• Use it for turbines, compressors, pumps, and generators.
• Polyphenylene sulfide (PPS) tip offers durability.
• AISI 303 or 304 stainless steel case resists corrosion.
• Need a longer range? Check our 3300 XL 11 mm Proximity Probes.
• For inquiries, contact us via WhatsApp at +86 158 8020 0923.

Technical Specifications

• Brand: Bently Nevada
• Model: 330102-00-48-10-02-05
• Series: 3300 XL 8 mm
• Linear Range: 2 mm (80 mils) from 0.25 to 2.3 mm
• Recommended Gap: -9 Vdc (approx 1.27 mm / 50 mils)
• DC Resistance (1.0m): 7.59 ± 0.50 Ω
• Temperature Range (Standard): -52°C to +177°C
• Temperature Range (Extended Tip): -52°C to +218°C
• Humidity Tolerance: <3% scale factor change at 93% humidity for 56 days
• Pressure Seal: Viton® O-ring design
• Thread Size: 3/8-24 UNF
• Max Thread Engagement: 0.563 inch
• Cable Length: 1.0 meter (3.3 feet) with armor
• Connector: Miniature coaxial ClickLoc, standard cable
• Weight: 323 g per meter (11.4 oz)

Probe Suffix Breakdown (Tree Format)

• 330102 = 3300 XL 8 mm Probe, 3/8-24 UNF thread, with armor
  • 00 = Unthreaded Length: 0.0 inch
  • 48 = Overall Case Length: 4.8 inches
  • 10 = Total Length: 1.0 meter (3.3 feet)
  • 02 = Connector: Miniature coaxial ClickLoc, standard cable
  • 05 = Approvals: CSA, ATEX, IECEx

Installation Guidelines

• Use 0.2 to 1.5 mm² (16 to 24 AWG) field wiring.
• Recommend 3-conductor shielded triad cable for best signal.
• Maximum field wiring length: 305 meters (1,000 feet) to monitor.
• Do not exceed 0.563 inch thread engagement.
• Avoid probe temperatures below -34°C to protect pressure seal.

Calibration & Maintenance Convenience

• No on-site calibration needed. Factory calibrated.
• Probe resists humidity and wide temperature swings.
• Simple ClickLoc connector for fast replacement.
• Visual gap check using DC voltage output (-1 to -17 Vdc).

Compatibility

• Works with 3300 XL Proximitor Sensor (5m or 9m type).
• 5m probes use 5m Proximitor. 3m option only for 330101 probes.
• Compatible with Bently Nevada monitors and field wiring up to 305m.

Certifications

• Hazardous Area Approvals: CSA, ATEX, IECEx (option 05)
• Intrinsically Safe (ia): AEx/Ex ia IIC T5…T1 Ga. Class I, II, III. Zone 0, Groups A-G.
• Non-incendive (nA / ec): AEx/Ex nA IIC T5…T1 Gc. Class I, Zone 2, Division 2.

Typical Applications & Diagnostic Ability

• Monitor radial vibration on turbomachinery shafts.
• Detect shaft eccentricity, position, and runout.
• Used in compressors, steam turbines, fans, pumps.
• Diagnose bearing wear, unbalance, misalignment, and rubs.

Package List

• 1 x 3300 XL 8 mm Probe (length as ordered)
• 1 x Miniature ClickLoc connector (attached)
• 1 x Installation manual (digital copy available)
• Warranty: 12 months from shipment date.

Shipping Methods

• We ship via FedEx, UPS, and DHL.
• Tracking number provided within 24 hours.

FAQ – Frequently Asked Questions

• What is the linear range of this probe?
  2 mm (80 mils) from 0.25 mm to 2.3 mm from target.
• Can I use this probe with a 9m Proximitor sensor?
  No. Only 330101 probes support 3m cable for 9m Proximitor. Use correct pairing.
• What happens if my site temperature drops below -34°C?
  The pressure seal may fail prematurely. Keep above -34°C.
• How do I set the gap correctly?
  Adjust to -9 Vdc output. That equals about 1.27 mm (50 mils).
• Do you pressure test probes before shipping?
  No. Contact custom design department if you need pressure seal test.
• Which field wire length gives best frequency response?
  Shorter is better. See Figures 10 and 12 for rolloff at long lengths.

Selection Guide – Choose the Right Probe

• Need 3-meter total length? Pick 330101 model (not this one).
• Need 5-meter cable? Use with 5m Proximitor sensor only.
• Need higher temperature tip? Choose extended range option (-52°C to +218°C).
• Need intrinsically safe approval? This model includes CSA/ATEX/IECEx.
• Need longer linear range? See our 3300 XL 11 mm Proximity Probes.

Tip from our engineers: Always use shielded triad cable for long runs. Keep field wiring under 305 meters. Avoid routing near VFD cables to reduce noise.

Copyright © 2026 PLCDCS HUB Limited. All rights reserved.
Original Source: https://plcdcshub.com/
Partner: Powergear X Automation Limited
Oiltech Controls Limited