GE 151X1225EK01PC04/109W6930P001 Wind Turbine Control Module

Description

Product Overview

GE 151X1225EK01PC04/109W6930P001 is a wind turbine control module for power control and data communication. It supports 1.5MW to 5MW units. It fits on-grid and off-grid sites. And it runs stable in hot, cold, and wet climates.

• Designed for wind turbine automation work.
• Wide AC input range for global grids.
• IP65 build for harsh outdoor zones.
• Fast communication for command signals.
• Low fault rate and long MTBF life cycle.

Technical Specifications

• Brand: General Electric (GE)
• Model: 151X1225EK01PC04/109W6930P001
• Application: Wind turbine control
• Power Input: 100V – 240V AC
• Output Capacity: 1.5MW – 5MW (site based)
• Efficiency: Up to 98%
• Operating Temp: -40°C to 85°C
• Communication: MODBUS, CANbus, Ethernet
• Interfaces: RS485, Ethernet, USB
• Dimensions: 225 mm x 300 mm x 120 mm
• Weight: 1.5 kg
• Cooling: Passive or active
• Protection: IP65 rated body
• MTBF: 150,000 hours
• Certifications: IEC 61400, ISO 9001, UL
• Vibration: Up to 2.5 G
• Mounting: Rack or wall-mounted

Extended Performance Values

• Harmonic Control: Stable power wave output
• Surge Withstand: Designed for outdoor grid spikes
• Data Delay: Under 20 mS typical
• Thermal Balance: Low heat rise under full load
• Signal Clarity: Reduced line noise on long cable runs

Product Advantages

• Strong field reliability for coastal and desert plants.
• Simple interface for new or retrofit towers.
• Low standby draw for energy savings.
• Stable behavior in unstable wind cycles.
• Quick wiring for short outage windows.

Delivery

• FedEx global transport
• UPS international shipping
• DHL express support for rush orders

Warranty

• 12 months hardware coverage
• Replacement on verified defect cases

Professional FAQ

Is this module fine for older turbine models?

Yes. Check connector and protocol match first.

Can it handle fast weather changes?

Yes. The wide temperature rating supports harsh climates.

What if the grid voltage rises too fast?

Use surge hardware and stable grounding at the cabinet.

Can I run long data lines?

Yes. Shielded cable is best for long-distance signals.

How do I check install success?

Verify comms link, heat value, and startup handshake.

Purchase Guidance

• Confirm turbine model and rated output.
• Check protocol: MODBUS, CANbus, Ethernet.
• Confirm mounting plan: rack or wall.
• Share site data for matching support.

Copyright © 2025 PLCDCS HUB Limited
https://plcdcshub.com/ . All rights reserved.

Partner: Powergear X Automation Limited https://www.powergearx.com/

Partner: Oiltech Controls Limited
https://www.oiltechcontrols.com/

Contact:
+86 158 8020 0923