Description
Product Overview
The IS200WETAH1A is a circuit board from GE. It belongs to the Mark VIe system. This board works mainly in wind energy applications. The Mark VIe also manages turbines for gas, oil, hydro, thermal, and nuclear. It includes software tools for maintenance and limit checking diagnostics.
Model Breakdown (Tree Structure)
- IS200 – GE Mark VIe series
- WETAH – Wind Energy Turbine Auxiliary Hardware
- 1A – First revision version
Technical Specifications (MECE Classification)
- Brand: GE
- Model: IS200WETAH1A
- Series: Mark VIe
- Type: Wind turbine control board
- Temperature range: Industrial grade (refer to GE manual)
- Environmental tolerance: Designed for wind turbine cabinets
- Immunity: Built-in hardware and software diagnostics
Key Components on Board
- 7 fuses for circuit protection
- 4 transformers
- 25 TP test points
- 6 terminal strips for wiring
- 100+ voltage regulators
- Voltage regulators keep output steady
- They auto-adjust for load and input changes
- Coil inductors, capacitors, and resistors
- Relay components and integrated circuits
- Diodes and jumper switches
Connectors & Plugs
- 45+ plugs and connectors total
- One vertical male pin connector
- Plug connectors from 2-position to 20-position
- P4 and P5 use conductive dots or traces
Physical Features
- Exposed copper strip on edges
- Factory drilled holes along all four edges
- One auxiliary board attached
- Auxiliary board label: IS210BPPBH2C
- Voltage regulators line three edges in parallel rows
Installation Guide
- Mount in Mark VIe rack system
- Use proper ESD grounding before handling
- Match connectors carefully (2 to 20 positions)
- Secure all terminal strips firmly
- Check fuse ratings before power-up
Debugging & Maintenance
- Use 25 TP test points for troubleshooting
- Software tools show limit check data
- Diagnostics built into hardware and software
- Replace fuses easily when needed
- No special tools required for basic checks
Compatibility
- Part of GE Mark VIe system
- Works with IS210BPPBH2C auxiliary board
- Use with GE wind turbine software tools
Certifications
- Refer to GE Mark VIe system documentation
- Designed for industrial wind applications
- Meets GE internal quality standards
Package Contents
- 1 x IS200WETAH1A circuit board
- Auxiliary board IS210BPPBH2C attached
- No cables or fuses included (install separately)
Warranty & Shipping
- Warranty: 12 months from delivery date
- Shipping carriers: FedEx, UPS, DHL
- Fast global delivery available
Typical Applications
- Wind turbine control systems
- Gas and oil turbine management
- Hydro power generation
- Thermal power plants
- Nuclear facility turbine systems
Diagnostic Capabilities
- Limit checking in hardware and software
- Maintenance alerts from programmable tools
- Test points allow voltage verification
- LED indicators (refer to GE manual for details)
Professional FAQ
- What voltage does this board use? Check GE Mark VIe system manual for exact ratings.
- Can I use this without the auxiliary board? No. The IS210BPPBH2C is attached and required.
- How many voltage regulators on this board? Over 100 regulators in parallel rows along three edges.
- Is this board new or refurbished? Contact us for current stock condition details.
- Does it work with older Mark V systems? No. This board is for Mark VIe only.
Experience-Based FAQ
- My wind turbine shows comm errors. Is this board bad? Check TP test points first. Use software diagnostics to isolate fault.
- One fuse blew. Can I replace just that fuse? Yes. But check why it blew. Maybe a short downstream.
- Why are there so many voltage regulators? Wind turbines have variable power. Regulators keep each circuit stable.
- How do I test this board before installing? Use the 25 TP points with a multimeter. Compare to GE specs.
- Can I return if it doesn’t work in my system? Yes. 12-month warranty covers defects. Contact us first.
Selection Guide
- Step 1 – Confirm you have a GE Mark VIe system.
- Step 2 – Verify application is wind, gas, oil, hydro, thermal, or nuclear.
- Step 3 – Check if you need the auxiliary board (included).
- Step 4 – Measure available rack space. Board fits standard Mark VIe slot.
- Step 5 – Review fuse ratings. Order spares if needed.
- Step 6 – Contact us for volume pricing or custom orders.
For inquiries, contact us via WhatsApp at +86 158 8020 0923.
Copyright © 2026 PLCDCS HUB Limited. All rights reserved.
Original Source: https://plcdcshub.com/
Partner: Powergear X Automation Limited
Oiltech Controls Limited
0.0 Average Rating Rated (0 Reviews)