IC693BEM335 Ethernet Interface GE Fanuc Series 90-30

Description

GE Fanuc IC693BEM335 Ethernet Network Interface Module

Connect Series 90-30 PLCs to field devices. Exchange analog/discrete data via Ethernet. Hot-swap not supported – install with power off.

TECHNICAL DATA

• Brand: GE Fanuc
• Model: IC693BEM335 (Full Suffix: IC693BEM335)
• Type: Ethernet Interface Module
• Ports: 2 × Serial (FIP bus compatible)
• Speed: 2.5 MHz operation
• Power: 5 VDC
• IP Rating: IP20 (indoor use)
• LEDs: 3 status indicators

INSTALLATION GUIDE

1. Disconnect all power sources
2. Mount in Series 90-30 backplane (any non-CPU slot)
3. Connect 5VDC power supply
4. Use serial ports for field devices

COMPATIBILITY

• Works With: GE Fanuc Series 90-30 PLCs only
• Not Compatible: RX3i or other PLC systems

PACKAGING

• IC693BEM335 Module
• Mounting screws
• 12-month warranty card
• Excludes: Certificates/manuals

SHIPPING

FedEx | UPS | DHL – Global 2-5 day delivery

FAQ

Q: Can I use this with RX3i PLCs?
A: No. Only for Series 90-30 systems.

Q: Is hot-swapping possible?
A: Never. Power must be disconnected.

Q: Safe for outdoor use?
A: IP20 rating requires indoor climate-controlled panels.