3300/65-03-01-00-00-01-00 Bently Nevada | Dual Probe Monitoring Module

Description

Product Overview

• Bently Nevada 3300/65-03-01-00-00-01-00 is a dual probe displacement monitor.
• It tracks shaft movement with high stability.
• The unit supports two independent probe inputs.
• It fits critical rotating equipment protection.
• Main advantage: clear displacement data for fast decisions.

Key Technical Data

• Brand: Bently Nevada
• Series: 3300 Series
• Model: 3300/65-03-01-00-00-01-00
• Monitor Type: Dual Probe Monitor
• Measurement Mode: Shaft displacement
• Range: 0 to 15 mils
• Metric Range: 0 to 0.38 mm
• Output Signal: 4–20 mA
• Max Load: 600 ohms

Electrical Characteristics

• Supply Voltage: 20 to 30 VDC
• Nominal Input: 24 VDC
• Power Stability: Designed for low ripple noise.
• Signal Accuracy: Maintains steady output under load.

Measurement Performance

• Resolution: Detects small shaft movement changes.
• Linearity: Stable response across full scale.
• Repeatability: Consistent readings over time.
• Response Speed: Suitable for real-time monitoring.

Environmental & Mechanical Data

• Operating Temperature: -40°C to +85°C
• Protection Rating: IP65 enclosure
• Weight: Approx. 0.5 kg
• Dimensions: 160 x 100 x 50 mm
• Vibration Tolerance: Designed for industrial sites.

Installation Notes

• Supports panel or cabinet mounting.
• Keep probe cables away from power lines.
• Ensure stable grounding during wiring.
• Allow space for heat dissipation.

Maintenance & Operation

• No routine calibration needed.
• Front access simplifies checks.
• LED indicators assist quick diagnosis.
• Reduces downtime during inspections.

System Compatibility

• Works with Bently Nevada proximity probes.
• Integrates with PLC and DCS systems.
• Fits existing 3300 monitoring racks.

Typical Use Cases

• Steam turbine shaft monitoring.
• Compressor thrust position tracking.
• Large motor displacement control.
• Critical pump protection systems.

Product Advantages

• Dual input reduces hardware count.
• Wide temperature support.
• High enclosure protection.
• Long service life.

Warranty & Shipping

• Warranty: 12 months.
• Shipping Options: FedEx, UPS, DHL.
• Careful industrial-grade packaging.

FAQ

• Can this monitor handle slow shaft movement?
• Yes. It detects very small displacement changes.
• Is IP65 enough for oil mist areas?
• Yes. It resists dust and light liquid exposure.
• Does dual probe input improve reliability?
• Yes. It allows comparison and redundancy.
• What should I check before startup?
• Confirm probe gap and power voltage.
• How do I select the right displacement range?
• Match it to shaft clearance and machine speed.

Copyright © 2025
PLCDCS HUB Limited.
All rights reserved.

Partner:
Powergear X Automation Limited
Oiltech Controls Limited

Contact:
+86 158 8020 0923