Description
Product Overview
The Flexem FR-A0004M is a small and stable analog module for many field tasks. It gives clear 16-bit output and clean signal steps. It fits lines that need smooth speed, fine control, and low noise. And it works in wide plant temperatures and supports fast changes in load. It also installs fast with a simple plug block.
Core Capabilities
- 4 clean analog channels for stable use
- 16-bit steps for fine output control
- Voltage range from -10V to 10V
- Current range from 0 to 20mA
- Custom full-scale value up to 30000
- ±0.5 percent full-range precision
- Input voltage impedance above 2k ohms
- Input current impedance under 500 ohms
- Quick wiring with a removable block
- Wide temp work from -10 to 60°C
- Safe storage from -20 to 70°C
- Humidity from 5 to 95 percent non-condensing
- Compact size of 111×18×76 mm
- Light weight near 65 g
Extended Technical Information
- Low drift for long plant cycles
- Fast update rate for smooth loops
- High noise immunity for heavy floors
- Strong stability under load changes
- Clear output steps for test tools
- Supports slow and fast response modes
- Good linearity in full-range output
- Low thermal shift in hot zones
Key Selling Points
- Simple install with no special tools
- Clean signals with low ripple
- Works with many Flexem PLC units
- Long life in dusty or busy plants
- Good choice for speed lines and sensors
- Fast change of channel type in setup
Application Areas
- Food and packing units
- Drive control skids
- Testing racks and lab tools
- Light motion systems
- Field adjustment panels
Warranty
- 12-month warranty from ship date
- Support for normal use issues
Shipping Options
- FedEx
- UPS
- DHL
FAQ
- How do I tune the output range
- You set the full-scale value in the tool and match the field load.
- What if the output looks unstable
- Check ground lines and shorten the analog cable to reduce noise.
- Can I mix voltage and current on one unit
- You can set each channel mode in the software before running.
- How do I test the module before final use
- Use a simple meter and check each channel at low and high points.
- What helps in long-term stable use
- Keep wiring tight and check the block for dust during service.
Copyright © 2025 PLCDCS HUB Limited https://plcdcshub.com/. All rights reserved.
Partner: Powergear X Automation Limited https://www.powergearx.com/
Contact: +86 158 8020 0923 | sales@plcdcshub.com
0.0 Average Rating Rated (0 Reviews)